How To Make Folding Legs For A Table - Coffee Table Design Ideas

How to Make Sturdy Folding Legs for a Table

Folding legs are a useful addition to any table, as they allow the table to be easily stored away when not in use. They are also relatively easy to make, requiring only a few basic tools and materials. This guide will show you how to make folding legs for a table in just a few simple steps.

Materials you'll need:

* 1x4 pine boards * 1/2-inch plywood * Wood glue * Screws * Nails * Hinges * Clamps

Instructions:

Cut the legs.

The first step is to cut the legs to the desired length. The length will depend on the size of the table you are making. For a standard-sized table, you will need four legs that are each about 24 inches long. 2.

Attach the plywood.

Once the legs are cut, you need to attach the plywood to the bottom of each leg. This will provide a surface for the hinges to be attached. To do this, spread a thin layer of wood glue on the bottom of one of the legs and then place the plywood on top. Use clamps to hold the plywood in place while the glue dries. 3.

Attach the hinges.

Once the plywood is attached, you need to attach the hinges. To do this, simply line up the hinges with the edge of the plywood and then screw them into place. Be sure to use screws that are long enough to go through both the plywood and the leg. 4.

Fold the legs.

Once the hinges are attached, you can fold the legs up. To do this, simply lift up on the top of the leg and then fold it down until it is flat against the bottom of the leg. 5.

Repeat steps 1-4 for the other three legs.

Once you have made the first leg, you can repeat steps 1-4 for the other three legs. 6.

Assemble the table.

Once all four legs are made, you can assemble the table. To do this, simply attach the legs to the tabletop using screws. Be sure to use screws that are long enough to go through both the tabletop and the legs. 7.

Enjoy your new table!

Once the table is assembled, you can enjoy using it for years to come. The folding legs will make it easy to store the table away when not in use.

Tips:

* You can use any type of wood to make the legs, but pine is a good choice because it is relatively inexpensive and easy to work with. * If you want to make the legs more durable, you can use thicker plywood or even metal. * You can also add a finish to the legs, such as paint or varnish, to protect them from the elements.