How To Make X Frame Table Legs

X frame table legs are a popular choice for rustic and industrial-style furniture. They're relatively easy to make, and they can add a touch of style to any table. In this article, we'll show you how to make X frame table legs using basic woodworking tools.

Materials:

4 pieces of 2x4 lumber, each 24 inches long
2 pieces of 1x4 lumber, each 18 inches long
Wood glue
Clamps
Screws

Tools:

Circular saw or miter saw
Drill
Countersink bit
Sandpaper

Instructions:

1. Cut the 2x4 lumber into four pieces, each 24 inches long. These will be the legs of the table.

2. Cut the 1x4 lumber into two pieces, each 18 inches long. These will be the crosspieces that connect the legs.

3. Apply wood glue to the ends of the crosspieces, and then clamp them to the legs, forming an X shape. Make sure that the crosspieces are centered on the legs.

4. Drill pilot holes through the crosspieces and into the legs. Then, drive screws through the pilot holes to secure the crosspieces to the legs.

5. Countersink the screws so that they are flush with the surface of the wood.

6. Sand the entire surface of the table legs to smooth out any rough edges.

Your X frame table legs are now complete! You can attach them to a tabletop using screws or bolts.