How To Cover A Veneer Table Top

By | February 24, 2021

How to Cover a Veneer Table Top

Veneer table tops are a beautiful and durable addition to any home. However, over time, they can become scratched, dented, or stained. If your veneer table top is starting to show its age, you don't have to replace it. You can cover it with a new material to give it a fresh new look.

There are a few different materials that you can use to cover a veneer table top, including:

  • Contact paper: Contact paper is a self-adhesive paper that is available in a variety of colors and patterns. It is easy to apply and remove, making it a good option for temporary repairs or if you want to change the look of your table top often.
  • Laminate: Laminate is a durable plastic material that is available in a variety of colors and finishes. It is more difficult to apply than contact paper, but it is also more durable.
  • Wood veneer: Wood veneer is a thin layer of real wood that is applied to the surface of the table top. It is the most expensive option, but it also gives the table top the most natural look.

Once you have chosen a material, you will need to gather some supplies. These include:

  • A sharp knife or utility knife
  • A ruler or measuring tape
  • A pencil or pen
  • A cutting mat
  • A squeegee or credit card

Now that you have your materials and supplies, you are ready to begin covering your veneer table top. Here are the steps:

  1. Clean the table top. Remove any dirt or dust from the surface of the table top with a damp cloth.
  2. Measure and cut the material. Measure the length and width of the table top and cut the material to size. If you are using contact paper or laminate, you will need to cut it slightly larger than the table top so that you can wrap it around the edges.
  3. Apply the material. If you are using contact paper, peel off the backing and apply it to the surface of the table top. If you are using laminate, apply a layer of contact cement to the back of the laminate and to the surface of the table top. Allow the contact cement to dry for a few minutes before pressing the laminate into place.
  4. Smooth out the material. Use a squeegee or credit card to smooth out any bubbles or wrinkles in the material.
  5. Trim the edges. If you are using contact paper or laminate, trim the edges of the material flush with the edges of the table top. If you are using wood veneer, you can sand the edges to smooth them out.

Your veneer table top is now covered and looking like new. With a little care and maintenance, it will last for many years to come.

Tips for covering a veneer table top

  • If you are not sure how to cover a veneer table top, you can hire a professional to do it for you.
  • Be sure to clean the table top thoroughly before applying the new material.
  • Measure and cut the material carefully to ensure a good fit.
  • Apply the material evenly and smoothly.
  • Trim the edges of the material flush with the edges of the table top.


Refinishing A Wood Veneer Table

Dining Room Table Makeover Refinishing A Wood Veneer Stacy Risenmay

Create A Veneer Starburst Wood

Create A Veneer Starburst Wood

Stain A Wood Veneer Kitchen Table Top

How To Stain A Wood Veneer Kitchen Table Top Refinishing Diy

Driftwood Refinished Veneer Tabletop

Driftwood Refinished Veneer Tabletop Sand And Sisal

Pretty Wood Veneer

How To Cover Ugly Laminate With Pretty Wood Veneer Addicted 2 Decorating

Stain A Wood Veneer Kitchen Table Top

How To Stain A Wood Veneer Kitchen Table Top Refinishing Diy

Driftwood Refinished Veneer Tabletop

Driftwood Refinished Veneer Tabletop Sand And Sisal

Resawn Veneer Top Popular Woodworking

Resawn Veneer Top Popular Woodworking

Veneering A Table Top N Wood

Veneering A Table Top N Wood Review

Sanding A Veneer Table Top For

Sanding A Veneer Table Top For Furniture Flipping Beginners

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.